Thermoplast Extruder v1.0, a System Module type part.

The thermoplastic extruder, ready to extrude.

More information: reprap.org

Generate Part List

Quantity:

Component Parts

Part	Type	Quantity
100K thermistor	Electronic Component	1
M3 nut	Fastener	14
M3 washer	Fastener	32
M3 x 30 cap	Fastener	4
M3 x 35 cap	Fastener	2
M3 x 40 cap	Fastener	4
M3 x 50 cap	Fastener	4
M5 nut	Fastener	1
M5 washer	Fastener	2
M5 x 30 cap	Fastener	1
Extruder Nozzle	Machined Part	1
Flexible Drive Shaft	Machined Part	1
Half Bearing	Machined Part	2
Heater Barrel	Machined Part	1
PTFE Insulator	Machined Part	1
Screw Drive	Machined Part	1
3mm ID Silicon Tubing	Miscellaneous	1 mm
Grease	Miscellaneous	1
High Temp Epoxy	Miscellaneous	1 g
PTFE Tape	Miscellaneous	1 mm
Thermoplastic	Miscellaneous	1 g
Extruder Motor	Electric Motor	1
Printing Service	Printed Part	5
Nichrome 80	Wire	200 mm

Suppliers

No suppliers found.

Where is it used?

Module	Subassembly
RepRap v1.0 "Darwin"	The entire RepRap machine, ready to print.
RepStrap v1.0 "Seedling"	This is an easy to build repstrap machine to get you printing

Embed this part list:

<iframe src="http://parts.reprap.org/embed/module/Thermoplast+Extruder+v1.0" width="600" height="500" frameborder="0">Visit http://parts.reprap.org/embed/module/Thermoplast+Extruder+v1.0</iframe>

Wikidot.com embed:

[[iframe http://parts.reprap.org/embed/module/Thermoplast+Extruder+v1.0 width="600" height="500" frameborder="0"]]