| Id | Part | Quantity |
|---|---|---|
| .156" 4 position housing | 1 | |
| .156" crimp-on connector | 4 | |
| .156" header | 4 | |
| C3 | .22uF ceramic capacitor 1206 | 1 |
| R3, R16 | 0.25 ohm resistor 2512 | 2 |
| 10 pin IDC connector | 2 | |
| INTERFACE | 10 pin IDC header | 1 |
| C1, C4, C6, C8, C12 | 100nF ceramic capacitor 1206 | 5 |
| C10, C11 | 100uF electrolytic capacitor D55 | 2 |
| R2 | 10k ohm resistor 1206 | 1 |
| R15 | 10K ohm trimpot SMT 4mm | 1 |
| R5, R7, R8, R17 | 1k ohm resistor 1206 | 4 |
| C2 | 1nF ceramic capacitor 1206 | 1 |
| R6 | 2.2k ohm resistor 1206 | 1 |
| POWER | 4 pin molex connector | 1 |
| IC3 | 7805DT | 1 |
| DRIVER | A3982 | 1 |
| LED1, LED2, LED3 | Green LED 1206 | 3 |
| LED4, LED5 | Red LED 1206 | 2 |
| J1, J2 | RJ45 Jack | 2 |
| PCB | Stepper Motor Driver v2.2 PCB | 1 |
| 10 pin ribbon cable | 12 inch |